3/8-32 tap drill size
11/32"
- Inches
- 0.3438
- Millimetres
- 8.73
- Thread
- 77%
Drill a 11/32" hole before cutting a 3/8-32 thread. That is the standard tap drill for about 75% thread.
3/8-32 thread and hole sizes
| Thread | 3/8 diameter, 32 threads per inch, extra fine (UNEF) |
|---|---|
| Major diameter | 0.3750 in 9.52 mm |
| Pitch | 0.0312 in 0.794 mm |
| Tap drill, about 75% thread | 11/32" 0.3438 in |
| Tap drill, about 50% thread | Letter T 0.3580 in, for stainless and other hard materials |
| Clearance hole, close fit | Letter W 0.3860 in |
| Clearance hole, free fit | Letter X 0.3970 in |
| Nearest metric bit | 8.7 mm |
Why 11/32"
A tap cuts threads into the wall of a hole, so the hole has to be smaller than the screw. For a 3/8-32 thread the hole that leaves exactly 75% thread is 0.3446 in. The closest standard bit is 11/32" at 0.3438 in, which leaves 77%.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go one step larger.
Tools for this job
- 3/8-32 tap
- 11/32" drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details