M4 x 0.7 tap drill size
3.3 mm
- Inches
- 0.1299
- Inch bit
- #30
- Thread
- 77%
Drill a 3.3 mm hole before cutting an M4 thread with 0.7 mm pitch. The rule for metric taps is diameter minus pitch.
No metric bits? A #30 bit (0.1285 in) gives about 81% thread.
M4 x 0.7 thread and hole sizes
| Thread | M4, 0.7 mm pitch, coarse |
|---|---|
| Major diameter | 4 mm 0.1575 in |
| Tap drill | 3.3 mm 0.1299 in |
| Closest inch bit | #30 0.1285 in |
| Clearance hole, close fit | 4.3 mm |
| Clearance hole, medium fit | 4.5 mm |
Why 3.3 mm
Subtract the pitch from the diameter: 4 minus 0.7 is 3.3 mm. That leaves 77% thread, the usual target for a cut tap.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go 0.1 mm larger.
Tools for this job
- M4 x 0.7 tap
- 3.3 mm drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details