M16 x 2 tap drill size
14 mm
- Inches
- 0.5512
- Inch bit
- 35/64"
- Thread
- 77%
Drill a 14 mm hole before cutting an M16 thread with 2 mm pitch. The rule for metric taps is diameter minus pitch.
No metric bits? A 35/64" bit (0.5469 in) gives about 81% thread.
M16 x 2 thread and hole sizes
| Thread | M16, 2 mm pitch, coarse |
|---|---|
| Major diameter | 16 mm 0.6299 in |
| Tap drill | 14 mm 0.5512 in |
| Closest inch bit | 35/64" 0.5469 in |
| Clearance hole, close fit | 17 mm |
| Clearance hole, medium fit | 17.5 mm |
Why 14 mm
Subtract the pitch from the diameter: 16 minus 2 is 14 mm. That leaves 77% thread, the usual target for a cut tap.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go 0.1 mm larger.
Tools for this job
- M16 x 2 tap
- 14 mm drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details