1/4-32 tap drill size
7/32"
- Inches
- 0.2188
- Millimetres
- 5.56
- Thread
- 77%
Drill a 7/32" hole before cutting a 1/4-32 thread. That is the standard tap drill for about 75% thread.
1/4-32 thread and hole sizes
| Thread | 1/4 diameter, 32 threads per inch, extra fine (UNEF) |
|---|---|
| Major diameter | 0.2500 in 6.35 mm |
| Pitch | 0.0312 in 0.794 mm |
| Tap drill, about 75% thread | 7/32" 0.2188 in |
| Tap drill, about 50% thread | #1 0.2280 in, for stainless and other hard materials |
| Clearance hole, close fit | Letter F 0.2570 in |
| Clearance hole, free fit | Letter H 0.2660 in |
| Nearest metric bit | 5.6 mm |
Why 7/32"
A tap cuts threads into the wall of a hole, so the hole has to be smaller than the screw. For a 1/4-32 thread the hole that leaves exactly 75% thread is 0.2196 in. The closest standard bit is 7/32" at 0.2188 in, which leaves 77%.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go one step larger.
Tools for this job
- 1/4-32 tap
- 7/32" drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details